DWZ-302 Extractor Socket Wrench Bit Set for Hex Socket head type screws

The ENGINEER DWZ-302 is a set of four Screw Extractor socket bits which fit onto your own 3/8" drive (9.5mm square) socket wrench - these are specifically designed for the quick & easy removal of screws with Hexagon socket (Allen Key) type heads - please refer to photo gallery for the actual screw sizes that can be extracted with the DWZ-302 kits.

• set includes the DWZ-05, DWZ-06, DWZ-08 & DWZ-10 hex screw extractors
• the sharp and fine-pitch spiral tip 'grips' all 6 sides of a hex socket firmly ...without slippage!
• no need to strike with a hammer - just press the extractor bit firmly into the ruined hex screw head & twist it out
• other screw head types such as Phillips, Torx, square socket can be extracted *if* an electric drill is used to drill a pilot hole in the screw head first (please refer to the guide in the photo gallery)
• Socket size:  3/8" drive (please check your socket driver connector square size first -  it should measure 9.5mm)
• constructed from high carbon steel
• Made in Japan