SET OF FIVE CRIMP PIN EXTRACTORS FOR MOLEX, ENGINEER PAS SET
  • SET OF FIVE CRIMP PIN EXTRACTORS FOR MOLEX, ENGINEER PAS SET

PAS-SET crimp pin extractor set (5pc)

£62.49
  • • interchangeable die plate set for the Engineer Inc. 'Handy Crimp Tool'
  • • largest size die plate set (of the 3 die plate sets available)
  • • die widths - 2.5mm, 2.8mm, 3.1mm, 3.4mm & 3.7mm
  • • allows crimping of over 100 different crimp pin types.
  • • constructed from special alloy steel
Quantity
Last items in stock

A unique dedicated set of FIVE crimp pin removal tools, which are for extracting round/circular ended type crimp pins and socket terminals from their housings - you can now remove Amp, Molex, J.S.T., Hirose (HRS), JAE Tyco Wurth etc. crimped pin connectors with ease.

Please note: The PAS-xx crimp pin extractor range being sold here is pretty much the same specification as the other range of extractior tools we sell (SS-30-SS34 - http://www.precisionhandtools.co.uk/crimped-pin-extractor-remover-tool-molex-jst-amp-hrs-jae/Engineer-SS-Molex-JST-etc-crimp-pin-extractor-tool-set , they just have slightly differing methods of usage - so it's down to personal preference. Please take a look at the demo video for each & see which variant you think you're likely to prefer to use.

Not to be confused with far lesser quality products from China, Taiwan etc ...these are top notch quality extractor tools with the highest grade materials used in their construction, manufactured by a well established & highly regarded Japanese Engineering tool company. 

Checkout this short demo video to see how fantastically well these tools work...

 

Perfect and simple for extracting pin & socket contacts
Newly designed construction with built-in return spring

PAS-3034.jpg

 

The specifications of the five tools is listed in the table further below (use the picture immediately below to help you reference the table,  though please note, the photo

actually shows An SS type ejector variant (syringe plunger type), however the diameter specification of the 'pin' end is the same as the PAS-xx type extractor being sold in this advert...

ejector1.jpg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(mm)

 

 

 

 

Model

 

 

 

Inner Diam.
of Sleeve

 

Outer Diam.
of Sleeve

A

B

C

PAS-30

1.9

       2.5

12

64

21

PAS-31

2.1

2.7

PAS-32

2.4

2.9

PAS-33

3.1

3.6

PAS-34

2.7

3.2

 

 

A: Sleeve
B: Overall Length (minimum)
C: Stroke of Ejector

 

 

 

 

PAS_main.jpg

pas3034e.gif

 

The table below references the correct extractor tool for some of the more common Mfr pin housings & sockets... 

*Reference for extracting typical connectors

Brand / Connector

Pin Housing

Socket Housing

"AMP"Mini Universal Mate-N-Lok

PAS-30

PAS-30

"AMP"Universal Mate-N-Lok

PAS-34

PAS-34

"AMP" Commercial Mate-N-Lok

PAS-32

PAS-34

"JST" ML & EL Series

PAS-31

PAS-31

"JST" L & LL Series

PAS-33

PAS-33

"MOLEX" 1545 Series

PAS-33

PAS-34

"MOLEX" 1625 Series

PAS-30

PAS-31

"MOLEX" 3191 Series

PAS-33

PAS-33

 

Buyer note: The manufacturer does not supply these in 'complete' sets of five (only individiually), however we are bundling all five tools together for  'complete set' price (which is beneficial price wise vs buying individually), however since the manafacturer does not supply these as a complete set, there is no dedicated 'set' case/packaging ....you will receive the five extractor tools supplied from us in very simple plastic wrapper/packaging. Additionaly, no instructions are supplied, but the video above illustrates clearly how to use these tools!

Or if you prefer...

PAS-SET
2 Items